The most common tools that start with D are the drill, dovetail saw, dead blow hammer, dial caliper, drywall knife, dolly and dough scraper. Below are 58 of them, grouped by use, with one plain line on what each one does.
Quick Picks for Word Games
Playing Scattergories or a similar game? These are easy to remember and widely accepted.
| Tools That Start With D | What it is |
|---|---|
| Drill | Makes holes and drives screws |
| Dustpan | Collects swept-up dust |
| Dolly | Platform on wheels for moving heavy things |
| Duct tape | Strong tape for quick repairs |
| Digger | Machine that digs earth |
| Doorstop | Keeps a door open |
Hand Tools That Start With D
Hand tools need no power. They are the first thing most people reach for in a home workshop.

| Tools That Start With D | What it does |
|---|---|
| Dovetail saw | Small, fine-toothed backsaw for cutting dovetails and other fine joints |
| Dead blow hammer | Hammer that hits hard but barely bounces back |
| Drawknife | Two-handled blade you pull toward you to shave wood |
| Diagonal cutters | Pliers that snip wire and small cable (also called “dikes”) |
| Drift punch | Metal punch you strike with a hammer to push out pins and bolts |
| Dowel jig | Guide that keeps drill holes straight for dowel joints |
| Drywall knife | Wide, flexible blade for spreading and smoothing joint compound |
| Drywall saw | Small pointed saw for cutting holes in drywall |
| Deburring tool | Removes sharp edges left after cutting or drilling metal |
| Diamond file | Small file with diamond grit for hard materials like glass or ceramic |
Why a Dead Blow Hammer Doesn’t Bounce
A normal hammer head is solid, so some of the energy bounces back into your hand. A dead blow hammer has a hollow head partly filled with loose material, usually steel shot or sand. After the hit, the filling keeps moving forward, so more of the force goes into the work and less comes back. That is why woodworkers use one to knock joints together without denting the wood, and machinists use one to seat a part in a vise.
One caution: “dead blow” describes the bounce, not how soft the face is. A hard-faced dead blow hammer can still dent metal.
Which Drywall Knife Size Should You Use?
A 6-inch knife is a common choice for pressing tape into compound. A starter set of 6″, 10″ and 12″ knives covers most home projects, according to Toolstash. The wider knives help you feather the edges so the seam disappears under paint.
Power Tools That Start With D

| Tools That Start With D | What it does |
|---|---|
| Drill driver | Drills holes and drives screws; cordless models are the most popular |
| Drill press | Stand-mounted drill for straight, repeatable holes |
| Dremel | A brand name many people use for any small rotary tool (sanding, cutting, engraving) |
| Die grinder | Small, fast handheld grinder for shaping and cleaning up metal |
| Disc sander | Sands with a spinning abrasive disc |
| Drum sander | Sands wide boards flat as they pass under a rotating drum |
| Dust extractor | Vacuum that connects to a tool and pulls dust in as it is made |
| Drywall screw gun | Drives drywall screws to a consistent depth |
| Demolition hammer | Breaks up concrete, brick and tile |
| Dado blade | Blade set for a table saw that cuts wide, flat-bottomed grooves |
| Diamond blade | Blade with a diamond edge for cutting tile, stone and concrete |
| Dowel drill (gang drill) | Rig that drills rows of holes in concrete for dowels |
Check before you buy a dado blade. Not every table saw can run a dado set. Look at your saw’s manual for arbor length and maximum dado width first, as Toolstash advises. A stacked set can usually be adjusted to cut anywhere from 1/4″ to 29/32″ wide, according to Canadian Woodworking.
Why Pair a Drill With a Dust Extractor
Drilling or cutting concrete, brick and stone can release silica dust. OSHA warns that breathing in tiny silica particles can cause permanent lung damage. Its construction rule (29 CFR 1926.1153) lists dust-control methods for common tasks.
| Situation | What OSHA’s fact sheet says |
|---|---|
| Dowel drilling in concrete, outdoors | Use a vacuum dust collection system, and a HEPA-filtered vacuum to clean out holes |
| Dowel drilling indoors or in an enclosed space | Table 1 does not cover it, so the employer must do an exposure assessment |
| Handheld drills in general | A drill with a shroud and dust collection is the standard control, per Hilti’s summary of the rule |
The rule covers workplaces, not weekend projects. Still, the idea works at home too: catch the dust where it starts. Bosch’s summary says the collector should give the airflow the tool maker recommends and use a filter that is 99% efficient or better. The OSHA fact sheet dates from 2017, so read the current rule text before relying on it for work.
Measuring and Testing Tools That Start With D

| Tools That Start With D | What it does |
|---|---|
| Dial caliper | Measures outside, inside, depth and step sizes with a sliding jaw and a dial |
| Digital caliper | Does the same job but shows the number on a small screen |
| Dividers | Two-pointed tool for marking equal distances and scribing circles |
| Depth gauge | Measures how deep a hole or slot is |
| Dial indicator | Dial gauge that shows tiny movement, used to check alignment and flatness |
| Digital multimeter | Measures voltage, current and resistance |
| Digital level | Shows an angle as a number instead of a bubble |
How to Read a Dial Caliper
The beam gives the big numbers. The dial gives the last two decimals. So you always read the beam first, then add the dial. Machinist Guides shows this example:
| Step | What to read | Example |
|---|---|---|
| 1 | Largest whole inch on the beam | 3.000″ |
| 2 | Largest 0.1″ mark on the beam | 0.100″ |
| 3 | Needle position on the dial | 0.006″ |
| Total | Add all three | 3.106″ |
Check your own dial face first. The example caliper reads in thousandths of an inch, and yours may differ. Also use good light, because the gap between 1.000″ and 1.001″ is hard to see in a dim shop.
Kitchen Tools That Start With D

| Tools That Start With D | What it does |
|---|---|
| Dicer | Cuts vegetables into even cubes |
| Dough scraper | Flat blade that cuts, lifts and portions dough and scrapes the counter clean |
| Dough whisk | Looped whisk that mixes heavy dough without clogging |
| Dough hook | Stand-mixer attachment that kneads dough |
| Dough docker | Spiked roller that pokes small holes so dough doesn’t puff up |
| Double boiler | Pot set over simmering water for gentle heat, such as melting chocolate |
| Dutch oven | Heavy lidded pot for soups, braises and bread |
| Dish rack | Holds washed dishes while they drain and dry |
| Dipper | Long-handled scoop for liquids |
| Digital food thermometer | Gives a quick temperature reading to check doneness |
| Deep-fry thermometer | Clips to the pot so you can keep oil at the right heat |
| Dredger | Shaker for dusting flour or powdered sugar |
| Dumpling press | Mold that folds and seals dumplings |
A note on the dough scraper. It goes by many names, including bench scraper, bench knife and dough cutter, according to Wikipedia. Bakers like it because dough sticks to it less than to warm hands, so you need less flour on the counter.
Garden and Outdoor Tools That Start With D

| Tools That Start With D | What it does |
|---|---|
| Dibber | Pointed hand tool that makes planting holes for seeds, bulbs and seedlings |
| Digging fork | Loosens soil and lifts root crops |
| Digging bar | Heavy steel bar for breaking hard ground and prying out rocks |
| Dandelion weeder | Long, narrow blade that pulls the weed out with its root |
| Dethatching rake | Rake with sharp tines that pulls dead grass out of a lawn |
| Deadheading shears | Snips off spent flowers to encourage new blooms |
| Drop spreader | Drops seed or fertilizer in an even strip as you walk |
Moving, Cleaning and Household Tools That Start With D

| Tools That Start With D | What it does |
|---|---|
| Dolly | Platform on wheels for moving heavy items |
| Drain snake | Flexible coil that clears clogged drains |
| Duct tape | Strong cloth tape for quick repairs |
| Dustpan | Collects dust and crumbs you have swept up |
| Duster | Lifts dust from shelves and furniture |
| Drop cloth | Sheet that protects floors and furniture while you paint |
| Doorstop | Holds a door open |
Which D Tool Fits the Job?
| If you need to… | Reach for… |
|---|---|
| Cut fine joints by hand | Dovetail saw |
| Cut a wide groove for a shelf | Dado blade on a compatible table saw |
| Tap parts together without damage | Dead blow hammer |
| Measure thickness to a thousandth of an inch | Dial or digital caliper |
| Tape and finish drywall seams | Drywall knife (6″ to press tape, wider to finish) |
| Cut bread or pizza dough into portions | Dough scraper |
| Move a heavy appliance | Dolly |
FAQs About Tools That Start With D
Is DeWalt a tool that starts with D?
No. DeWalt is a brand, not a type of tool. The company sells many kinds, including hand tools like saws, screwdrivers and levels, so you may see its name beside many of the tools above. Dremel is also a brand, but people often use the name for any small rotary tool.
What is the difference between a drywall knife and a putty knife?
People often swap the names, but the jobs differ a little. A drywall (taping or joint) knife is wide and flexible for spreading compound over seams. A putty knife is usually smaller and suits patching small holes.
Should I buy a dial caliper or a digital caliper?
Dial calipers are easier to read than old-style vernier calipers, and digital ones are easier still, according to Travers. Machinist Guides recommends a digital caliper when your budget allows, since prices have come down. A dial caliper is still a fine choice if you already own one or prefer a needle to a screen.
